Tips to Test a Button Battery1787772
Button battery is known as a little battery which is commonly used to power the little electronic devices. This button battery gets its name because it is round and resembles buttons or coins. Numerous people are really not really familiar with this quite new kind of battery. When you are having electronic device which stops operating, it may be caused by a easy matter of the dead or dying button battery. At this time, this post is going to give you some tips of a testing method for the button battery that will assist you to check its situation.
As the initial step, you ought to eliminate the battery from your device and then you require to inspect it for determining the battery voltage. The voltage is generally marked on the battery. It is known that most of the button batteries are produced between 1.35 and three volts.
As the second step, you need to set the multimeter for displaying the voltage on the DCV scale.
The third step that you ought to do is to determine the positive side of your battery by finding side with a "+" that marked on it. Following that, you require to touch the good probe of multimeter (red) anyplace on this side.
The fourth step is to touch negative probe of multimeter (black) to the unfavorable side of your battery. The negative side is of course in the opposite side of the positive side.
The final step is to take a note of the voltage that is displayed on the multimeter. If you find that the voltage is about ten percent much less than the marked voltage on battery, you require to replace it. For instance, the 1.five battery must show the voltage of at least 1.35 volts, while the three volts battery must show the voltage of at least two.7 volts.
